Skip to content. | Skip to navigation

Dummy Model Support

Sections

Home

Personal tools

You are here: Home → Models → ES-2 and ES-2re → FAT Model → Performance → Rib Tests

Rib Tests

(A) Test setup 1

Fig. 37: ES-2 rib module test setup 1

Pendulum impacting the assembly at the rib guide
5 impact velocities
Damper assembly is removed

Test_setup_1_vel1

Test_setup_1_vel2

Test_setup_1_vel3

Test_setup_1_vel4

Test_setup_1_vel5

(B) Test setup 2

Fig. 38: ES-2 rib module test setup 2

Pendulum impacting the assembly at the rib guide
2 different pendulum masses
5 impact velocities
Damper assembly is included

Results - Low Mass Pendulum

Test_setup_2_lowmass_vel1

Test_setup_2_lowmass_vel2

Test_setup_2_lowmass_vel3

Test_setup_2_lowmass_vel4

Test_setup_2_lowmass_vel5

Results - High Mass Pendulum

Test_setup_2_highmass_vel1

Test_setup_2_highmass_vel2

Test_setup_2_highmass_vel3

Test_setup_2_highmass_vel4

Test_setup_2_highmass_vel5

(C) Test setup 3

Fig. 39: ES-2 rib module test setup 2

Pendulum impacting the assembly at the damper connection
5 impact velocities
Damper assembly is included

Test_setup_3_vel1

Test_setup_3_vel2

Test_setup_3_vel3

Test_setup_3_vel4

Test_setup_3_vel5

(D) Test setup 4

Fig. 40: ES-2 rib module test setup 2

Pendulum impacting the assembly between the damper and guide
5 impact velocities
Damper assembly is included
The impact direction is oblique

Test_setup_4_vel1

Test_setup_4_vel2

Test_setup_4_vel3